lansysspec

All our landing systems now provide a soft sweet-spot landing that is compliant with the American Society of Safety Engineers ANSIZ359.1-1992 (R1999) American National Standard fall arrest force requirements as well as the OSHA Regulation 29 CFR Section 1, 1910.66AppC, Personal Fall Arrest system force requirements.

1 0 Y e a r W a r r a n t y Gill is committed to your Track & Field programs, now, and ten years from now. That’s why all our landing systems come with a full 10 year warranty. If any failure occurs in the first 10 years, under normal use and care, we will repair or replace the damaged part.

V a l u e After considering the characteristics of design, appearance, functionality, warranty and price, the value of our landing systems becomes obvious. No other company can compare to our price-per-feature value.

M a t e r i a l s

Foam: All of our pits now include a denser, higher strength foam. This foam has been tested to still provide a soft landing, but to keep its shape for longer period of time. It helps prevent “sagging” and “bottoming out” for a jumper.

Fabric: 18 oz vinyl coated woven polyester for maximum durability and a puncture resistance of 390 psi. Unlike vinyl coated nylon, which can expand and contract, this fabric holds its shape under the worst conditions. The polyester is coated on the inside and the outside of the fabric, giving it a softness to the touch but the strength and durability to last. All section seams are heat sealed for water resistance.

Velcro: Avionic grade hook and loop material exceeds grip requirements even after 5000 assembly cycles

Covers: The weather and ground covers use the same super strong vinyl coated woven polyester as used in our pit casings with top and bottom heat sealed seams to keep moisture out.

Mesh: Top of base units are made of vinyl coated woven polyester mesh for superior strength. The mesh top allows for the desired escape of air which provides optimal landing compression.

Seams: Extra heavy #138 nylon thread is used throughout. Seams are folded and triple stitched then welded together using a high frequency heat sealer to increase strength and provide water resistance. D-ring straps are back stitched for added holding power.

Hardware: We have replaced our nickel plated snap hooks with a durable aluminum carabineer. The aluminum carabineers have several great qualities:

Click on thumbnails for larger pictures

· They are replacable. If one breaks they are simple to remove and interchange.

· Allow quick and easy removal of the top pad.

· These clips have been tested for a breakaway point, so less damage may occur to the landing pit during a wind storm or during other mobilization.

· Inexpensive. They save you money not only on their cost, but will also help give your landing pit a longer lasting life.

Heavy duty plastic zippers are corrosion resistant for smooth operation in all conditions. Our zippers are also sewn into folded over vinyl and are double stitched.

Top Pad: 2” foam encased in vinyl coated woven polyester mesh fabric covers the entire surface. Features 8’ x 10’ preferred landing zone in white mesh fabric.

All these factors create a longer lasting handle that is even tougher to rip out or destroy.

Angled Box Cutout: Specially designed 45° cutout around the box allows pole to rotate freely eliminating any contact with the pad.

Color Options: The standard blue/gray color combination provides superior resistance to Ultra Violet radiation damage. Our standard gray mesh stays cooler to the touch on hot/sunny days compared to other colored mesh.

Customizations: Custom colors are available for an additional 5%. Longer delivery times apply. Call for details.